• Safe and secure

  • Quick and easy

  • web-based solution

  • 24/7 Customer Service

Rate form

4.3 Statisfied

233 votes

How to Fill in the Dd Form 879 by Following Guidlines on the Website?

CocoSign lends a hand to each user to simplify the workflow and improve work productivity by having a better management of the files. Follow the below steps to have a better understanding of how to edit Dd Form 879 more professional.

Open the form

Customize the form online

Fax the signed form

  1. Open the unfilled form and click to check the whole document.
  2. Read over the whole document and note which part you need to page.
  3. Write your personal background in the blank form.
  4. Select a form field and put a check mark if you see a demanded blue box.
  5. View the whole form once again to see if there's anything you miss.
  6. Select the sign tools to put your signature or initial at the end of the form.
  7. Save the document by clicking "Done" button.
  8. After edit the document, you are free to print, download, and send the form.
  9. If you have any inquires, please send an email to the support team to get more data.

By making use of CocoSign, you can fill in Dd Form 879 and put your digital signature right away. It will definetely improve your productivity and make your life much easier.

Thousands of companies love CocoSign

Create this form in 5 minutes or less
Fill & Sign the Form

How CocoSign Can give Assistance to You page Dd Form 879

youtube video

Key Elements of Writing the Dd Form 879

what you see here is a Commodore 64.cartridge that I have created by.sticking on EEPROM and some other.components on a breadboard to connect to.the c64 cartridge port I am using a.breakout board that was created by Sven.Peterson you can find this design.alongside other awesome projects on this.github page I will add the link in the.description below in this video I will.try to explain how c64 cartridges work.and how you can create one using.different configurations in the end of.this video I will test my custom PLA.project using the Super's accent.cartridge configuration spent had the.courtesy to send me one of his bread.boards including all components needed.to assemble it the cartridge header was.already pre inserted and the H pins were.soldered using sticky tags I have.secured it a bit more and soldered the.rest of the pins next I have inserted.the pin header into the PCB and soldered.it as well you can use this connector to.attach a flat cable and connected to a.logic analyzer but in this project we.will be sticking jumper wires into it.that connect to the breadboard.we can continue by inserting the.connector without touch jumpers using.sticky text to hold them in place and of.course soldering the connections the.jumpers bridge some of the signals.between the c64 and the solder cartridge.connector on the PCB if the connections.are interrupted then the associated.signal on the PCB cartridge port is.pulled high by the resistor network so.an open jumper means that the pin is.high on the PCB cut red side we can now.solder this resistor network it is.important to note that pin number 1 must.be soldered correctly this pin can be.recognized by a dot on the resistor.network but if you are not sure you can.also measure it connection from pin 1 to.every other pin must give a resistance.of 10 kilo ohms the resistor network.goes behind the jumper header.I might have soldered this component.before but it can still be dropped in.using tweezers I can assure you that I.am NOT sponsored by sticky tags but for.sure they are handy to hold the.components in place while soldering the.reset switch is connected to the reset.signal as long as the jumper label to.reset is closed it is effective for the.cartridge and the c64 while this jumper.is open it only resets the cartridge.after finishing soldering will give the.board a good ways with isopropyl alcohol.let's test the solve the board by.inserting a cartridge I will use this.final cut with three.and it works in the last video I have.created this custom PLA tester so let's.take the opportunity and use this.breakout board to connect to it it was.much easier to connect it using the.breakout board then connecting to the.breadboard using those nasty connector.clips the custom PLA still appears to be.working after this introduction let's.continue with the real purpose of this.video which is creating cartridges on a.breadboard there are many types of.cartridges for the commodore 64 but in.this video i will focus on three.variations c64 architecture is natively.designed to run cartridges in the size.of 8 or 16 kilobytes it uses two pins.that are natively inputs to the pla chip.they are game and x ron the size of the.cartridge is determined according to.whether they are pulled down to the.ground.it simply swaps out active memory inside.the c64 to the one on the EPROM chip.let's start with the most simple 8.kilobyte version there are many websites.on the internet where you can find.images of cartridges that are designed.to run on emulators like vice the file.extensions is dark CRT device emulator.provides a tool where you can convert.the CRT format to a row binary file.which can be burned on an EEPROM let's.do that by using a bus terminal.now we can burn this converted file onto.an electrically programmable EEPROM to.do that I am using the mini Pro command.line tool apart from the warning that my.firmware is out of date we are getting.an error message that the file size that.we are trying to burn is not correct.this is due to the fact that I am using.a 32 kilobyte chip let's fix that and.fill the file with zeros to the desired.length by using this DD command.[Music].when we execute the mini pro command.again it shows that the e EEPROM has.been successfully programmed this is the.schematics of the eight kilobytes EE.prompt that we are going to build let's.hook up the breadboard first we connect.power and ground.two pins 28 and 14 then the right enable.pin which is active low needs to be.pulled high as we are not going to write.to the tip there are 16 address lines.that need to be connected on the.cartridge breakout board but to address.64 kilobytes we just need to connect 13.of them.these wires connect two pins a 0 through.a 12 of the chip on the breadboard.and we also need to connect a 12 to the.breakout board as we forgot about it.now we need to connect the data lines d0.through d7 and they will of course.connect to the related pins on the chip.the next pin that needs to be connected.is Rome L this connection will enable.the EEPROM chip by bringing output.enable and chip enable pin slow the X.from jumper wire is connected to ground.and this will let the c64 know that an 8.kilobyte cartridge has been inserted.before forgetting let's make sure that.both ends of the breadboard will have.the power and ground connected because.we are using a 32 kilobyte chip the.address lines 8 13 and a 14 need to be.pulled low and we will also add this 100.nano farad the coupling capacitor.between power and ground this should be.enough to run the centipede game let's.turn the c64 on and see what will happen.wait a second the game is freezing why.is this happening after spending some.time trying to figure out what was wrong.with the EPROM chip I gave up and.decided to try a regular 27 256 EEPROM.of the same size first the chip needed.to be erased as I was not sure if it was.empty.I knew this April eraser would come in.handy someday.I put the chip in the drawer and let it.erase for 10 minutes now we can insert.the chip into the EEPROM programmer to.write it we need to specify some other.parameters for the mini Pro command.it is a good idea to cover up the EEPROM.after it has been written I am using.this black electrical tape now we should.not be worried that our precious data.will get erased when the chip is.accidentally left out in the sunlight.okay it's time to swap the EPROM chip.with this new one but before we can test.it some wires need to be swapped as the.pen out of the two chips differs pin.number one on the 28 c 256 was a 14 and.on the new EEPROM it is cpp programming.voltage we need to swap it to the 5 volt.rail in order for the chip to operate.correctly pin 27 which was right and.able is now a 14 so it will be pulled.low let's try again.and yes this time the game is running.correctly we can now proceed with the 16.kilobyte cache with configuration to do.that we will need an end gate because I.do not have one at hand I will change to.NAND gates using the 74 LS 0 0 chip if.we use 2 8 kilobytes.chips the end gate would not be needed.as the ROM L and ROM edge ca'tridge.outputs can both in able to separate.eeproms rome l pin is set when the c64.is reading from the lower memory.addresses and rome edge is set when.reading from the higher memory address.space they can never be both active at.the same time because we are using this.one chip we have to use the.configuration as shown in this schematic.when the ROM L around 8 signal is low.then the output of the and gate will be.low that means the chip will be enabled.in both cases page 13 of the EEPROM is.connected to run our output.when the signal Togo's it will address.the lower or the higher 8 kilobytes of.the chip first we connect power and.ground.[Music].then we will take out the wire that.pulled a dirt into the ground in the.previous configuration and connect to.Rome l that used to connect the chip and.output enable pins ROM L also connects.to one of the inputs of the first NAND.gate and the second input of this gate.connects to ROM edge on the cartridge.port now we can connect the output of.the first NAND gate to the input of the.second one the second none gate also.becomes a not gate output of this gate.connects to the chip and output enable.pins of the EEPROM and finally the game.output connects to ground.it's time to prepare the chip like.before we convert the CRT fall to the.binary file this time we need to add.16,384 bytes to make the file 32.kilobytes in length we can now insert.the EEPROM in the programmer and give.the mini pro command to write it.[Music].let's cover the eeprom with the.electrical type and insert it back in.the breadboard.finally we can test the 16 kilobytes.cartridge black screen wait something is.happening.or is it.[Music].yes there is the crystal casos game.starting up just for fun I have.connected the scope to the ROM l and ROM.eight signals that select the memory.locations on the EEPROM as you can see.there is a pattern I think that it has.something to do with the refresh rate of.the video after zooming in we can see.that the signals are all over the place.but they are never simul taneous lilo.the last configuration that I am going.to show is for the super section.cartridge in my previous video I did.some tests on my custom PLA using the SR.LED circuit but I also wanted to test it.using the super section cat which I came.across a blog post on heck of net that.described how to build a replica of the.sketch which I will follow the steps.described there and try to build out on.a breadboard based on the schematics.that are included in this blog post this.schematic looks a bit like what we have.created thus far but there is a small.addition in the form of a D flip-flop.this circuit is included in the 74 LS 74.chip and luckily I still had one lying.around it latches the output of the 812.address line to the a14 input pin on the.EEPROM on each clock rice memory inside.the EEPROM at locations 8,000 and 9,000.is mirrored and when either of them is.addressed bit number 12 Togo's and.switches between the lower and upper.memory bank through the a14 address line.using this trick the cartridge can.contain a total of 20 kilobytes of data.let's extend the circle that we already.have by first adding connections to the.two new NAND gates 74 LS 0 0 has 4 none.gates so we can use the remaining 2.the first create are not get this jumper.wire connects from L on the cartridge.port to the input of the note gate.I am making a mistake here by connecting.it to ROM H but it will be fixed in a.moment the output of this Northgate.connects to one of the inputs of the.second NAND gate now the clock output of.the cartridge port is connected to the.other input of the NAND gate this is the.74 LS 74 D flip-flop chip we connect.power and ground to it the output of the.second NAND gate connects to the clock.input of the D flip-flop this is the.reset pin that will connect accordingly.to the reset on the cat which port and.the D input on the latch connects to a.12 address line which we tap from pin.number 2 on the EEPROM the Q output.connects to a 14 first we need to get.rid of this jumper wire that was pulling.it to ground the set input connects to 5.volts and finally let's fix the mistake.that we made in the beginning and switch.the connection to the ROM L instead of.the wrong h pin now we can finally.prepare the Super's action cartridge.first we need to convert the CRT file to.the binary format now we have to split.up the binary file like this described.in the heck up dotnet block post I will.first split the file in 4 kilobytes.chunks using the split command these.chunks need to be concatenated to the.final 32 kilobytes binary file using the.cat command in the order that I am.specifying here.we can now write this file to the EEPROM.[Music].I have connected the Super's accent.cartridge to the c64 with the custom PLA.now we will find out if the sketch that.we have created works with my custom PLA.chip and we are getting something it.looks like our supersection cartridge.and the custom PLA is working correctly.thank you for watching this video and.sticking to the end I hope you have.learned something about cartridges on.the commodore 64.please like and subscribe and I hope to.see you again soon.[Music].

How to generate an electronic signature for the Dd Form 879 online

You must be drawn to a multifaceted solution to electronic signatures for Dd Form 879. CocoSign will provide you with what you have been Searching for, a single online application that does not need any more installation.

You just need to have a satisfactory internet connection and your preferred appliance to utilize. Follow this steps to e-sign Dd Form 879 easily:

  1. Select the document you want to sign. You can also simply click the required document into this section.
  2. Select the category 'My Signature'.
  3. Select the types of signatures you need to put. It can be drawn, typed, or uploaded signatures.
  4. Once you have selected the type, press 'Ok' and 'Done'.
  5. Download the form after signing.
  6. You can also forwar it on email.
  7. Once you are done, save it. You can also forward it with other people.

CocoSign makes electronic signatures on your Dd Form 879 more multifaceted by providing various features of merging two documents, adding additional fields, invitation to sign by others, etc.

Due to our adaptable features, CocoSign's eSignature tool can help users to sign your PDF electronically well on all the electronic devices like mobile android or iOS, laptop, computer, or any other relevant operating system.

How to create an electronic signature for the Dd Form 879 in Chrome

Chrome has got support as a adaptable browser due to its comprehensive features, useful tools, and extensions. In this way, you can keep all your tools on your home screen in front of you. You just need to press what you require without searching for it complicatedly.

Using this useful extension feature offered by Chrome, you can add CocoSign extension to your browser and use it whenever you need to design eSignatures in your documents. With CocoSign extension, you will also get more features like merge PDFs, add multiple eSignatures, share your document, etc.

Here are the basic instructions you need to follow:

  1. Notice the CocoSign extension on Chrome Webstore and press the option 'Add'.
  2. Log in to your account if registered before, otherwise press signup and register with us.
  3. On your Dd Form 879, right-click on it and go to open with option. From there, choose CocoSign reader to open the document.
  4. Press 'My Signature' and design your personalized signatures.
  5. Put down it on the page where you require it.
  6. Press 'Done'.
  7. Once you are done, save it. You can also forward it with other people.

How to create an electronic signature for the Dd Form 879 in Gmail?

Mailing documents is so welcome that majority of companies have gone paperless. Therefore, it will be a great alternative if one can insert esignature on the doc by Gmail by a direct route. You can do it by placing a CocoSign extension on your Chrome. Here is what you need to do:

  1. Place the CocoSign extension to your browser from the Chrome Webstore.
  2. Log in to your pre-registered account or just 'Sign up'.
  3. Open the email with the document you need to sign.
  4. From the sidebar, click 'Sign'.
  5. Type your electronic signatures.
  6. Design them in the document where you need to.
  7. Press 'Done'.

The signed file is in the draft folder. You can easily deliver it to your required mailing address.

Making use of electronic signatures in Gmail is such a secure and safe tool. It is specifically designed for people who wants a flexible workflow. Utilize CocoSign, and you will surely be among our hundreds of happy users.

How to create an e-signature for the Dd Form 879 straight from your smartphone?

mobile phones are the most effective electronic devices used these days. You must be interested in using e-signature from this most used electronic device.

Also, with eSignature capability on your mobile phone, you can e-sign your document anytime, anywhere, away from your laptop or desktop. You can make use of CocoSign electronic signature on your phones by following these instructions:

  1. Navigate to the CocoSign website from your mobile browser. Login to your CocoSign account or sign up with us if you don't have registered before.
  2. Select the document you need to e-sign from your mobile folder.
  3. Open the document and click the page where you want to put the electronic signatures.
  4. Press 'My Signatures'.
  5. Design your electronic signature and place it to the page.
  6. Press 'Done'.
  7. Load the document or directly share through email.

That's it. You will be done signing your Dd Form 879 on your phones within minutes. With CocoSign's remote signature software, you no longer need to worry about the security of your electronic signatures and use our application of your choice.

How to create an e-signature for the Dd Form 879 on iOS?

Many softwares have a harder setup when you start using them on an iOS device like the iPhone or iPad. However, you can insert esignature on the doc simply with CocoSign, either using the iOS or Android operating system.

Below steps will help you to e-sign your Dd Form 879 from your iPad or iPhone:

  1. Place the CocoSign application on your iOS device.
  2. Design your CocoSign account or login if you have a previous one.
  3. You can also sign in through Google and Facebook.
  4. From your internal storage, select the document you need to e-sign.
  5. Open the document and click the section you want to put your signatures.
  6. Design your electronic signatures and save them in your desired folder.
  7. Save the changes and email your Dd Form 879.
  8. You can also share it to other people or upload it to the cloud for future use.

Select CocoSign electronic signature solutions and enjoy flexible working on your iOS devices.

How to create an electronic signature for the Dd Form 879 on Android?

In recent, Android gadgets are popular used. Therefore, to make convenience to its customers, CocoSign has developed the application for Android users. You can use the following steps to e-sign your Dd Form 879 from Android:

  1. Place the CocoSign app from Google Play Store.
  2. Login to your CocoSign account from your device or signup if you have not been pre-registered.
  3. Press on the '+' option and add the document in which you want to put your electronic signatures.
  4. Go for the area you want to put your signatures.
  5. Design your e-signature in another pop-up window.
  6. Place it on the page and press '✓'.
  7. Save changes and email the file.
  8. You can also share this signed Dd Form 879 with other people or upload it on the cloud.

CocoSign assists you to to design a lot electronic signatures whenever. Connect with us now to automate your document signing.

Dd Form 879 FAQs

Here are some frequently asked questions along with their answers to clear up the doubts that you might have.

Need help? Contact support

How do I fill out the form of DU CIC? I couldn't find the link to fill out the form.

Just register on the admission portal and during registration you will get an option for the entrance based course. Just register there. There is no separate form for DU CIC.

How do I fill out the dd form for SBI bank?

Demand drafts can be purchased by means of cash or through cheques However, banks do not accept cash for demand drafts amounting to rupees 50000 and above. This is as per income tax guidelines In these cases, you have to necessarily transfer the amount from your account using your cheque

Easier, Quicker, Safer eSignature Solution for SMBs and Professionals

No credit card required14 days free